PRESENTATION OUTLINE
THIS IS THE PIECE OF WOOD I'M GOING TO USE TO MAKE A DVD HOLDER
THIS IS MY PIECE MARKED OUT
I USED A CHISEL TO GET THE JOINT
NEXT I HAD TO CUT DOWN EACH SIDE OF THE LINES
SADLY MY PIECE BROKE SO I HAD TO START AGAIN
THE JOINT I'M GOING TO USE IS CALLED THE BRIDLE JOINT
WHEN I GOT BACK TO WHERE I WAS I USED THE FORRESTER DRILL BIT
THIS IS WHAT THE HOLE LOOKS LIKE
THIS IS WHAT THE PIECE SHOULD LOOK LIKE WHEN ITS FINISHED
