PRESENTATION OUTLINE
STEP 1: CUT A SLIT IN PAPER TUBE AND PUT SLIDE DIMMER BIT IN.
STEP 2: PUT PAPER IN TO HOLD BIT IN PLACE.
STEP 3: ATTACH WIRE BIT TO SLIDE DIMMER.
STEP 4: ATTACH RGB LED BIT TO WIRE.
STEP 5: INSERT INTO TOP OF TUBE.
STEP 6: ATTACH WIRE BIT TO OTHER SIDE OF SLIDE DIMMER.
STEP 7: ATTACH POWER BIT TO WIRE.
STEP 8: CUT ANOTHER PAPER TUBE IN HALF.
STEP 9: TAPE TUBES TOGETHER.
STEP 10: MAKE LID, TAPE ONE SIDE TO TUBE AND PUT POWER BIT IN.
STEP 11: TURN POWER SWITCH ON AND CLOSE LID.
